Seal Out The Damp, Keep The Strengthen In
Introduction
When it comes to waterproofing, one cannot afford shortcuts, especially in India’s diverse and often humid climate. Dr. Fixit Pidifin 2K offers a long-lasting, flexible, and eco-friendly waterproofing solution. This 2-component polymer-modified cementitious coating is specially designed to protect concrete and masonry surfaces, ensuring your structures remain dry, safe, and durable.
Features
- Flexible Waterproof Membrane: Once applied and cured, it forms a seamless, durable, and flexible waterproof barrier capable of withstanding structural movement and thermal stress.
- Withstands Hydrostatic Pressure: Tested to handle water pressure up to 10 meters, making it ideal for basements, tanks, rooftops, and wet areas.
- Damp Surface Application: Unlike many coatings, Pidifin 2K can be applied on damp (but not water-logged) surfaces, saving time during construction.
- Eco-Friendly Formula: Free from Volatile Organic Compounds (VOCs), making it a safer and more environmentally responsible choice for your projects.
- Excellent Adhesion: Strong bonding with concrete, plaster, and brick substrates ensures long-lasting protection and reduces the need for reapplication.
Step-by-Step Application Method
- Surface Preparation: Clean the surface thoroughly to remove dust, oil, loose particles, and laitance. Dampen the surface but avoid standing water.
- Mixing the Components: Gradually add the powder component into the liquid polymer while stirring continuously using a slow-speed drill. Ensure a lump-free, uniform consistency.
- Priming (Optional but Recommended): Use the diluted liquid component (1:1 with water) as a primer for better adhesion on highly absorbent substrates.
- First Coat Application: Apply the first coat using a brush or roller. Ensure complete surface coverage, especially around joints and corners.
- Second Coat Application: After the first coat is touch dry (approximately 4–6 hours), apply the second coat perpendicular to the first for better strength and uniformity.
- Curing & Protection: Allow the final coat to cure for at least 3–5 days before exposing it to water or laying tiles, screed, or plaster over it.
Health & Safety
- Wear gloves, goggles, and a mask while mixing and applying the product.
- Ensure adequate ventilation during application.
- Avoid direct skin and eye contact.
- In case of accidental contact, rinse thoroughly with water and seek medical attention if irritation persists.
- Keep out of the reach of children and store in a dry, cool place away from direct sunlight.
Technical Information
| Property |
Specification |
| Appearance |
Two-part kit – Powder (Grey) & Liquid (Milky) |
| Mixing Ratio (Powder: Liquid) |
2.5:1 by weight |
| Pot Life |
30–40 minutes @ 27°C |
| Curing Time |
3–5 days for full cure |
| Application Method |
Brush, roller, or trowel |
| Coating Thickness |
1.0 – 1.5 mm (2 coats) |
| Coverage |
~1.5 – 1.8 m²/kg for 2 coats @ 1.5 mm thickness |
| Resistance to Water Pressure |
Up to 10 m hydrostatic pressure |
| VOC Content |
Nil (Environmentally Friendly) |
| Shelf Life |
12 months in unopened condition |
Conclusion
Dr. Fixit Pidifin 2K is more than just a waterproofing solution — it’s your defense against seepage, mold, cracks, and structural decay. Its proven performance, flexible film formation, and user-friendly application make it an ideal choice for both residential and commercial waterproofing needs. Whether you're a contractor, engineer, or homeowner, this is the product your project deserves.
Call To Action
- Website: ADT INDUSTRIES
- Email ID: helpdesk@adtchemical.com
- Mobile No: +91 8080098992
- Technical Support: Available for project consultations and on-site training.
- Follow us: LinkedIn | Facebook | Instagram
